The Lunchbox for all occasions: The LunchBuddy is a whole Lunchbox system for the price of a normal lunch box! That is why we call them 3-in-1 Lunchbox, because the individual components can be used in three ways, namely as a double-decker box or the individual elements as separate boxes. If you are a little hungry, the flat box can be closed with the lid and transported solo, in medium hunger you just take the bottom bowl with the lid. So you can always choose the right box combination for the big or the small hunger.
As an accessory, there are dividers, which make the biplane box to the right Bento Box. Each individual compartment remains so large that you can still fill it with reasonable amounts - also thanks to the good height of the box. A bread roll or a sliced ??apple can easily disappear into one of the compartments.
As an accessory, the lids are available separately, so you can also use the two boxes separately at the same time, so just right for two children of different ages who have more or less food during kindergarten morning or school every day.
The 3-in-1 system consists of a deep lower shell and a flatter upper shell that snap into place; Due to the design, however, a small optical gap is created. The box-combination is closed with a well-fitting lid made of stainless steel and held by an additional band, so that you can quietly overfill the boxes. The accessories are available in different colours, both for the flat box and the box consisting only of the lower shell.
The lid and the box are also holding without rubber band or laterally attached clamps. However, the rubber band can serve as additional security in case of overfilling of the box, so that the content can’t push up the lid.
The rubber band is always required to connect the shallow and the deep boxes together. Although the boxes snap into each other slightly, there is no technical or a visible gap, since it was deliberately omitted with a side-mounted brackets, which then connect the two elements firmly together. Only by doing without the brackets, it is possible to use both the lower shell and the upper shell separately and thus the purpose of use flexible. If the lower box was provided with clamps that firmly connect the two box elements with the lid, then only the upper shell could be used separately, but the large lower shell always only in combination with the upper shell.
- Material: High quality 18/8 Pro-Grade Stainless Steel
- Dimensions (double decker-configuration): 19 cm x 14,5 x 7,5 cm
- Dimensions upper shell: 18 cm x 14 x 3 cm
- Dimensions lower shell: 18 cm x 14 x 5 cm
- Volume: 1199 ml
- Weight total: 540 g
- Weight lid: 135 g
- Weight lower shell: 200 g
- Weight upper shell: 160 g
- Delivery: 3-in-1 Stainless Steel Lunchbox System (upper shell, lower shell, lid, ribbon in green)